SUN OBP에서 하드웨어 점검하기.

테스트 환경은
SUN Netra t1 105
CPU: 440MHz
RAM: 256MB
HDD: 9GB 2개
기타: 기본 사양

1. pc consol로 접속한다.


2. Ok 프롬프트 상태에서 다음의 명령어를 입력한다.
setenv diag-switch? true
setenv diag-level max
setenv auto-boot? false

3. 설정을 저장하면 하드웨어를 진단하는 화면을 볼 수 있다.
reset-all

4. 결과보기

Resetting …

Software Power ON

@(#) SPARCengine(tm)Ultra CP 1500 3.10.25 ME created 2000/01/17 21:26
Enter Checking KB
ps/2 kbd check: 0000.0000.0000.00fe
Checking Sun KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory
Group Info[0000.0000.0000.0003] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0002] : 0000.0000.0000.0000
Group Info[0000.0000.0000.0001] : 0000.0000.0000.0108
Group Info[0000.0000.0000.0000] : 0000.0000.0000.0108
Done
Clearing Memory…Done
MEM BASE = 0000.0000.2800.0000
MEM SIZE = 0000.0000.0400.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2ffc
PC = 0000.0000.0000.3040
Decompressing into Memory Done
Size = 0000.0000.0008.6bf0
ttya initialized
flashprom flashprom Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi Version 9.1 (E$=2 MB) 2-2 module
Advanced PCI Bridge Version 1.3
Probing Memory Group #0 64 + 64 : 128 Megabytes
Probing Memory Group #1 64 + 64 : 128 Megabytes
Probing Memory Group #2 0 + 0 : 0 Megabytes
Probing Memory Group #3 0 + 0 : 0 Megabytes
Initialise 2nd I2c controller
Environmental monitoring: Enabled
i2c adc gpio gpio
i2c Probing Floppy: No drives detected
Probing /pci@1f,0/pci@1,1 at Device 1 network
Probing /pci@1f,0/pci@1,1 at Device 2 scsi disk tape
Probing /pci@1f,0/pci@1,1 at Device 3 network
Probing /pci@1f,0/pci@1 at Device 1 pci
Probing /pci@1f,0/pci@1/pci@1 at Device 0 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 1 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 4 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 5 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 6 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 7 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 8 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device 9 Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device a Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device b Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device c Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device d Nothing there
Probing /pci@1f,0/pci@1/pci@1 at Device e ide disk cdrom
Probing /pci@1f,0/pci@1/pci@1 at Device f Nothing there

Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.25 ME, 256 MB memory installed, Serial #12734874.
Ethernet address 8:0:20:c2:51:9a, Host ID: 80c2519a.”

댓글 남기기

Your email address will not be published.

%d 블로거가 이것을 좋아합니다: